Caterpillar® 236 – Cat 236 – Tire – Track Size and Specifications

Caterpillar® 236 – Cat 236 – Skid Steer Loader – Tires / Tracks – Quick Specs

  • Skid Steer Loader 
  • Engine Horsepower (HP)  63 Horsepower (HP) 
  • Width  66 in. 
  • Loader Lift Capacity at 35% (Percent)  1204 lbs (Pounds) 
  • Loader Lift Capacity at 50% (Percent)  1750 lbs (Pounds) 
  • Operating Weight  6858.6 lbs (Pounds) 
  • Tire Size     10-16.5
  • Standard Flow  21 Gallons per Minute (GPM) 
  • High Flow    
  • Pressure  3335 PSI (Pounds per Square Inch) 
  • Horsepower(HP) – Hydraulic Standard Flow  42 Horsepower (HP) 
  • Horsepower(HP) – Hydraulic High Flow  

Caterpillar® 236 – Cat 236 Operating Specifications

  • Breakout Force – Tilt Cylinder 5255lbs (Pounds)
  • Breakout Force – Lift Cylinder 4344lbs (Pounds)
  • Rated Operating Capacity 1750lbs (Pounds)
  • Rated Operating Capacity With Optional Counterweight 1850lbs (Pounds)
  • Tipping Load 3500lbs (Pounds)

Engine

  • Number Of Cylinders
  • Gross Power 63Horsepower (HP)
  • Net Power 59Horsepower (HP)
  • Power Measured @ 2600rpm
  • Displacement 183cubic-inches(in3) 
  • Net Flywheel Power 44Horsepower (HP)

Operational Capacities

  • Operational Weight 7030lbs (Pounds)
  • Fuel Capacity 23.8gallon
  • Max Speed 6.9mph
  • Hydraulics
  • Fluid Capacity 13.8gallon
  • Operating Speed 7.6mph
  • Tire Size 10 x 16.5

Loader

  • Operating Load Rating 1750lbs (Pounds)
  • Bucket Capacity 0.6yd3
  • Operating Weight 6810lbs (Pounds)
  • Hydraulic Pump Flow Capacity 22Gallons per Minute (GPM)
  • Loader Hydraulic Pressure 3300 psi
  • Loader Hydraulic Flow 22 Gallons per Minute (GPM)
  • Hydraulic Flow Standard flow

Refill Capacities

  • Cooling System 2.6gallon
  • Fuel Tank 23.8gallon
  • Hydraulic Tank 9.2gallon
  • Engine Crankcase 1.8gallon
  • Hydraulic System 13.7gallon
  • Chain Box Each Side 2gallon 

Caterpillar® 236 – Cat 236 Dimensions 

  • Length With Bucket 11.8ft in 
  • Width Over Tires 6.01ft in 
  • Ground Clearance 9in 
  • Height To Top Of Cab 6.87ft in 
  • Wheelbs (Pounds)ase 3.73ft in 
  • Length W/O Bucket 9.19ft in 
  • Clearance At Max Lift And Dump 7.87ft in 
  • Reach At Max Lift And Dump 23.12in
  • Wheel Base 3.73ft in
  • Bucket Pin Height Carry Position 10in
  • Clearance At Maximum Lift And Dump 94in
  • Length Without Bucket 110in
  • Bucket Pin Height Maximum Lift 10.17ft in
  • Maximum Overall Height 156in
  • Height Top Of Cab 6.84ft in
  • Bumper Overhang Rear Axle 41in
  • Reach Maximum Lift/Dump 21in
  • Turning Radius From Center Inc Bucket 85.24in
  • Length With Bucket On Ground 138in
  • Vehicle Width Over Tires 66in

Caterpillar® 236 – Cat 236 Tire Size

  • 10×16.5

Caterpillar® 232D – Cat 232D – Tire – Track Size and Specifications

Caterpillar® 232D – Cat 232D – Skid Steer Loader – Tires / Tracks – Quick Specs

  • Skid Steer Loader 
  • Engine Horsepower (HP)  67 Horsepower (HP) 
  • Width  58.9 in. 
  • Loader Lift Capacity at 35% (Percent)  1295 lbs (Pounds) 
  • Loader Lift Capacity at 50% (Percent)  1850 lbs (Pounds) 
  • Operating Weight  6213 lbs (Pounds) 
  • Tire Size 10-16.5
  • Standard Flow  18 Gallons per Minute (GPM) 
  • High Flow  26 Gallons per Minute (GPM) 
  • Pressure  3335 PSI (Pounds per Square Inch) 
  • Horsepower(HP) – Hydraulic Standard Flow  35 Horsepower (HP) 
  • Horsepower(HP) – Hydraulic High Flow  50.9 Horsepower (HP) 

Caterpillar® 232D – Cat 232D Operating Specifications

Engine

  • Net Flywheel Power 65.80 Horsepower (HP)
  • Peak Torque at 1,500 rpm SAE J1995 153.00 lbs (Pounds)f-ft
  • Net Power – SAE 1349 65.80 Horsepower (HP)
  • Net Power ISO 9249 66.50 Horsepower (HP)
  • Net Power SAE 1349 65.80 Horsepower (HP)
  • Displacement 134.30 in³
  • Stroke 3.90 in Bore 3.30 in

Operating Capacities

  • Operating Capacity with Optional Counterweight 1950.00 lbs (Pounds)
  • Tipping Load 3700.00 lbs (Pounds)
  • Breakout Force,
  • Tilt Cylinder 3984.00 lbs (Pounds)
  • Operating Weight 6213.00 lbs (Pounds)

Hydraulics

  • Loader Hydraulic Pressure 3336.00 psi
  • Loader Hydraulic Flow 18.00 Gallons per Minute (GPM)
  • Hydraulic Power (calculated) 35.50 Horsepower (HP)
  • Hydraulic Pressure 3336.00 psi
  • Maximum Loader Hydraulic Flow 26.00 Gallons per Minute (GPM)
  • Hydraulic Power (calculated) 50.90 Horsepower (HP) 
  • Travel Speed (Forward or Reverse): One Speed 7.60 mph
  • Travel Speed (Forward or Reverse): Two Speed Option 11.10 mph

Refill Capacities

  • Chain Box each side 1.80 gallon
  • Cooling System 3.20 gallon
  • Engine Crankcase 2.60 gallon
  • Fuel Tank 15.10 gallon
  • Hydraulic System 11.90 gallon
  • Hydraulic Tank 9.00 gallon

Caterpillar® 232D – Cat 232D Dimensions

  • Wheelbs (Pounds)ase 41.50 in
  • Length without Bucket 99.30 in
  • Length with Bucket on Ground 127.30 in
  • Height to Top of Cab 79.90 in
  • Maximum Overall Height 150.90 in
  • Bucket Pin Height at Maximum Lift 118.10 in
  • Bucket Pin Height at Carry Position 8.40 in
  • Reach – Maximum Lift/Dump 25.70 in
  • Clearance at Maximum Lift and Dump 88.70 in
  • Ground Clearance 6.70 in
  • Departure Angle 27.9degrees (°)
  • Bumper Overhang – Behind Rear Axle 35.20 in
  • Maximum Dump Angle 47.4degrees (°)
  • Vehicle Width over Tires 58.90 in
  • Turning Radius from Center – Machine Rear 59.60 in
  • Turning Radius from Center – Coupler 43.40 in
  • Turning Radius from Center – Bucket 77.80 in
  • Maximum Reach with Arms Parallel to Ground 49.20 in
  • Rack Back Angle at Maximum Height 88.2degrees (°)
  • Bucket Pin Reach at Maximum Lift 8.80 in

Caterpillar® 232D – Cat 232D Tire Size

  • 10×16.5
Get a Quote

Mammoth Tracks and Tires has your solid / pneumatic tires / attachments / steel / rubber Over the Tire OTT Tracks! 

Please call Mammoth Tracks and Tires at 307-381-1383 for your solid / pneumatic tires / attachments / Over the Tire OTT Tracks for your skid steer loader!

Best 10-16.5 / 12-16.5 / 14-17.5 Skid Steer Loader Solid / Pneumatic Tires for Sale / Specifications by Tire Size! Affordable Solid / Pneumatic 10-16.5 / 12-16.5 / 14-17.5 Tires for Sale by Size / Model / Tread. Many different tread patterns / manufacturers available for solid / pneumatic skid steer loaders for sale by tire size / tire tread pattern. Toughest solid / pneumatic rubber tires for skid steer loaders for sale.

Best solid tire / over the tire OTT tracks for sale for skid steer loaders. Top Rated affordable 10-16.5 / 12-16.5 / 14-17.5 Solid Tires / Rubber / Steer Over the Tire OTT Tracks for skid steer loaders for sale by tire size. Rubber Over the Tire OTT Tracks / Solid / Pneumatic tires for skid steer loaders for sale by tire size. Toughest combination rubber / steer over the tire OTT Tracks for skid steer loaders for sale by tire size / model.

Toughest 10-16.5 / 12-16.5 / 14-17.5 skid steer solid tires / OTT over the tire tracks for sale by size. Affordable rebuildable skid steer loader rubber / steer OTT over the tire tracks for sale. Best rebuildable over the tire tracks / solid tires for skid steer loaders for sale by tire size. Top economy rubber / steel over the tire OTT tracks for skid steer loaders for sale by tire size. Please call 307-381-1383 for popular manufacturers like Cat and Deere and a Mammoth Tracks and Tires specialist will help find the proper solid / pneumatic skid steer loader tires or Over the Tire Tracks. We carry McLaren / Camso and TracksPlus Over the Tire Tracks in variety of designs for 10-16.5 / 12-16.5 and 14-17.5 tire sizes!

We do carry a full line of attachments for skid steer loaders / mini excavators / track loaders! We carry McLaren Attachments / Blue Diamond Attachments / Mongo Attachments / Eterra Attachments / SkidPro Attachments and many other. Feel free to contact us at 307-381-1383 for your skid steer / mini excavator / CTL compact track loader / MTL multi terrain loader attachments. 

We sell McLaren Skid Steer / CTL Compact Track Loader / MTL Multi Terrain Loader / Mini Excavator Attachments:

Heavy Duty Grapple Bucket Attachment, Vertical Root Rake Grapple – OEM Series, Skid Steer Snow Plow Blade

, Skid Steer Snow Pusher Box, Skid Steer Power Rake, Skid Steer Rotary Tiller, Skid Steer Angle Broom, Skid Steer Pick-Up Broom, Log Grapple Bucket Attachment, 4-Way Dozer Blade Attachment, 6-Way Dozer Blade Attachment, McLaren Hydraulic Auger Systems, Skid Steer Brush Cutter, Excavator Bucket Attachment, Skid Steer Stump Buckets, Demolition and Recycling Yard Grapple Buckets, Skid Steer 4 in 1 Bucket – OEM Series, Skid Steer Rock Rake Grapple Bucket – OEM Series, Root Rake Grapple Bucket Attachment, Skid Steer Trencher, Post and Tree Puller – OEM Series

Call Mammoth Tracks and Tires at 307-381-1383 for your skid steer loader / mini excavator / compact track loader CTL / multi terrain loader MTL / skid steer attachments / solid / pneumatic skid steer loader tires / Rubber / Steel OTT Over the Tire Tracks!

Product Categories